How to Get Rid of Toilet Bowl Rings

by Editor

Are you tired trying out multiple products from time to time to clean the toilet ring, only to have each one fail? It’s a frustrating cycle that usually ends with you having a closet full of useless cleaning goods and a persistent toilet ring that keeps hassling you. To be able to get rid of toilet bowl ring, you must first figure out what is producing it; otherwise, you will be throwing solutions to a problem that didn’t even exist. 

 

What Causes the Toilet Bowl Rings?

 

Bacteria and mold, as well as hard water, are the most common causes of the ring in the toilet bowl.

 

  • Bacteria and Mold. This is caused by a buildup of germs or fungus in the water that adheres to the toilet bowl. When bacteria is exposed to a damp environment, it thrives, exacerbating the toilet bowl ring. This is more likely to occur in toilets that aren’t used frequently. It just takes a few bacteria to cause a problem, and they spread quickly. Bacteria like Serratia marcescens and Pseudomonas aeruginosa, specifically, form pink-ish colonies that can quickly expand into a pink ring where the water surface and the toilet bowl surface meet. This bacteria prefers to grow in regions with fatty substances, such as feces, which is why it’s so frequent in toilet bowls. It can also be discovered in the bath, shower, and sink because it is a water-loving bacteria that is prevalent naturally in such areas.

 

  • Hard Water, on the other hand, can likewise generate toilet bowl rings. Every drop of water contains dissolved minerals like calcium, magnesium, and iron, but hard water has a lot of them. The ring has a rusty color due to mineral deposits, but it can also appear black. As a result of the minerals leaching out of the standing water, they cling to the toilet bowl.

 

How to Get Rid of Pink Rings in the Toilet

This is a simple ring to remove, as regular toilet cleaners will clean and sterilize the toilet bowl while also removing the ring. By dousing bleach into the toilet bowl every time you flush, an automated toilet bowl cleaner such as this can help keep bacteria and mold at a minimal amount. This is an excellent addition to a regular cleaning practice because it keeps the bowl fresh while deodorizing it, too.

 

See also  How to Get Gum Out of Clothes

How do I get rid of black rings in the toilet bowl?

The source of the problem is hard water. Hard water contains greater than average quantities of calcium, magnesium, iron, aluminum, and manganese. They impart a dry, metallic flavor to water, make soap unlatherable, and leave a dry film on the skin. Minerals readily precipitate and form deposits on faucets, shower heads, coffee pots, and toilet bowls as black rings.

Black toilet ring is resistant to regular toilet cleaners. Finding methods to break down the mineral barrier and working through it with good old-fashioned scrubbing is chemistry and hard labor. You may need to engage a professional cleaner or purchase a heavy-duty cleaning product if you have a black ring caused by hard water. This sort of toilet bowl ring is just more difficult to remove than others.

 

Getting Rid of Toilet Bowl Rings

In most cases, weekly cleaning prevents excessive stain formation and lowers the appearance of any existing stains, restoring the bowl to its original pure white appearance. What happens if none of that works?

 

Baking soda and vinegar are used in this “recipe.”

When these two ordinary, non-toxic, and innocuous culinary ingredients are carefully combined, they may effectively clean a variety of objects, including hard water stains and toilet rings.

  1. 1 cup regular white vinegar, poured into the toilet bowl, and “whisk” it around with a toilet brush. Allow it to sit for about a minute.
  2. Fill the toilet bowl with a cup of baking soda and two more cups of vinegar. Prepare yourself since this will result in a fizzing motion. Allow for a 10-minute cooling period.
  3. Whisk slightly more with the toilet brush to ensure that the solution reaches stains above the waterline and under the rim. Nonetheless, do not flush.
  4. Allow 30 minutes for the solution to settle, swishing occasionally, until the stains are gone. Scrub any remaining stains with the toilet brush or a scrubby sponge. To rinse, flush the toilet.

Using vinegar and borax

Borax is a more powerful, yet widely available, multi-purpose cleaning chemical that can be used to remove hard water stains from the toilet. Borax can be found in the laundry section of most supermarkets or online. 20 Mule Team Borax is great for this stain removal process and can be a multipurpose household cleaner. 

  1. Fill the toilet bowl with 1/4 cup of borax and swish it around with a toilet brush.
  1. 1 cup vinegar, stir around again, and let the mixture settle for 20 minutes in the bowl.
  1. Finish by cleaning the stains out of the bowl with a toilet brush. To rinse, flush.
See also  Cleaning Mold From Walls

 

Using a Toilet Cleaning Product

If you have a store-bought toilet cleaner, you can use it to try to remove the toilet bowl ring. For instructions, refer to the manufacturer’s instructions. This is very effective in removing bacteria or fungus stains, although it may also work on stains caused by hard water. We suggest using Clorox Toilet Bowl Cleaning Gel for this one. 

 

The Use of Bleach

How about a little bleach? If you’re interested, give it a shot! Keep in mind that this method works best for bacteria or mold-induced toilet rings, not hard water. Follow the manufacturer’s package directions. Remember to flush the toilet a few times afterward. Bleach should never be mixed with other cleaning chemicals since harmful or hazardous fumes can result.

 

Use a Dishwasher Pod

Allow a few minutes for an automated dishwashing pod (any brand) to sit in the toilet bowl. With a toilet brush, scrub the spots out. Actually, a pod will dissolve in toilet bowl water at normal temperature. Automated dishwashing powder, on the other hand, will not yield the same results because it may not dissolve as well as the pod.

 

Denture Tablet Usage

The cleaning agent in denture tablets works nicely on porcelain fixtures. In the toilet bowl, drop a denture tablet. Allow it to fizzle for at least 30 minutes, if not longer. Remove difficult stains with a toilet brush, flush, and enjoy the sparkle! Efferdent Denture Cleanser Tablets is a highly recommended item (Amazon’s Choice). 

 

Making Use of Pumice Stone

To clean the ring in your toilet, don’t use a standard pumice stone. When chemical treatments aren’t working, use a softer pumice to scrub away hard water stains. It works nicely in conjunction with the baking soda and vinegar solution and is gentle enough not to scratch your toilet’s porcelain.

Making Use of Magic Eraser

A unique application for a Magic Eraser is to use it to remove toilet rings. Put a quarter of a Magic Eraser in the toilet bowl and leave it there overnight. For rings that aren’t too big or resistant, this should work. Make sure you get it out first thing in the morning – don’t flush it! We recommend using Mr. Clean Magic Eraser Original Cleaning Pads

See also  How to Clean Bathroom Floors

 

Using Barkeeper’s Friend as a Tool

Hard water stains can be removed from a variety of household surfaces, including your toilet bowl. Drain some of the water from the toilet bowl, then sprinkle the powder around the ring and scrape with a cleaning towel. For particularly tenacious stains, let it on for about 10 minutes. After that, carefully rinse and flush.

 

WD40

According to the manufacturer, WD40 can be used to remove toilet rings. Spray the WD40 on the ring to soften the rust and lime deposits, making them easier to scrape away. Spray. Wait for a few moments. Scrub. It’s that simple!

 

How Can Toilet Bowl Rings Be Avoided?

Clean on a regular basis… 

To avoid hard water toilet stains, you don’t need to apply harsh, expensive chemicals. When used on a daily basis, borax, baking soda, and vinegar clean and disinfect while also preventing hard water stains from forming.

 

Proper and Easy Maintenance 

  1. Do a regular maintenance weekly, or as long as necessary,  to help maintain your toilet clean and free of hard water buildup:
  2. Before going to bed, pour 1 cup of borax into your toilet bowl. Get it on the bowl’s sides, beneath the rim, and even within the bowl.
  3. Scrub quickly with a brush in the morning and flush. The borax loosens up everything visible and invisible, allowing you to clean considerably faster. Toilet rings, smells, and stains will flush away with ease and no effort!

 

Septic Tanks

In moderate amounts, ammonia products are safe to use in septic systems. Septic-system-friendly products include vinegar (both white and apple cider vinegar), Borax, OxiClean, and baking soda. Alternatives to chlorine bleach that are safe for septic systems are oxidized bleaches.

Rubber gloves should be worn to protect your hands. Bleach should never be mixed with vinegar or ammonia, as this might result in harmful chemical reactions.

 

Key Takeaways

Toilet bowls discolor for a variety of reasons that have nothing to do with housekeeping quality. In most situations, the toilet ring is caused by hard water, bacteria, and molds, as well as stagnant water in a toilet that isn’t used frequently. We’ve discussed a few different methods for removing the toilet bowl ring. However, you must clean your toilet at least once a week to keep germs, bacteria, odors, and unpleasant indicators of filth at bay.

 

Read More: 

How to Clean Bathroom Floors

How to Clean Vinyl Floors

Steam Mop for Laminate Floors

You may also like

You cannot copy content of this page